2. Chisel- Type Diamond Tools with Synthetical Diamond Blanks PL

Synthetic Diamond Insert 1.2mm x 3mm x 4mm is set on the centre with 0.25mm (0.010'') - 0.5mm (0.020") lapped radius with 55 degree included angle. Number 1 Morse Taper 20mm long shank.
MCS-5510 0.25mm (0.010'') Radius
MCS-5520 0.5mm (0.020'') Radius

Synthetic Diamond Insert 1.2mm x 3mm x 4mm is set on the centre with lapped radius with 55 degree included angle, 11mm diameter Okuma shank,
MC0-5510 0,010'' Radius.
MCO-5520 0,020'' Radius

Synthetic Diamond Insert 1.2mm x 3mm x 4mm is set on the centre with 0.25mm (0.010'') - 0.5mm (0.020") lapped radius with 55 degree included angle.
MCT-5510 0.25mm (0.010'') Radius
MCT-5520 0.5mm (0.020'') Radius