STUDER Grinding Machines

Form or step dressing suggest for 12" diameter 2"width wheels. 10 mm x 12mm hand set grains.
W Tungsten hot-pressed bond.
Side mounted plate is set to 5mm x 10.5mm x 19mm blade and set at 0 degree angle. Studer Number 1 Morse Taper 20mm long shank.
Suggestions for Wheel grit size:
Part Code. Wheel grit size.
BTS-33 80-100
BTS-35. 60-80
BTS-37. 35-50

Impregnated dresser are recommended for a great many dressing operations such as centerless and cylindrical grinding, surface grinding, straight-faces and some profile dressing, slotting,
45 degre angular dressing and
general purpose tool room applications.
1E. block 5/32" x 1/4" x 3/8" set at 0 degree angle
In to #1 Morse taper shank
BGS-1E8F. 30/40 Mesh grit size.
BGS-1E6F. 20/30 Mesh grit size

Form or step dressing large hard wide wheels. 10 mm depth x 20 mm wide hand set grains.
W Tungsten hot-pressed bond.
Side mounted plate 5mm x 22mm x 19mm blade is set at 0 degree angle into Number 1 Morse Taper 20mm long shank.
Suggestions for Wheel grit size:
Part Code. Wheel grit size recommend.
BTS-27. 30-40
BTS-25. 50-60
BTS-23. 80-100

Studer cone point CVD 1/2 Carat number one Morse 19mm long tapers shank. Precision dresser is accurately coned to the specified included angle and radius. These tools are used for precision dressing when the most intricate form and radii are required.
BCS-6010 60 degree angle 0.010" radius
BCS-6020 60 degree angle 0.020" radius

Synthetic Diamond Insert 2mm x 3mm x 4mm is set on the centre with 0.25mm (0.010" ) - 0.5mm ( 0.020" ) lapped radius with 55 degree included angle. Number 1 Morse Taper 20mm long shank
MCS-5510. 0.010" Radius
MCS-5520. 0.020" Radius

Straight and profile dressing 6" up to 16" wheels.
Handset Natural Diamond Grains.
Center Mounted 10mm Wide x 12mm depth grain plate.
W Tungsten hot-pressed bond.
5mm x 13mm x 19mm blade is set at 0 degree angle.
Number 1 Morse Taper 20mm long shank.
Suggestion for Wheel grit size:
BTS-420. 30-40 Grit
BTS-419. 50-60 Grit
BTS-290. 80-100 Grit

Inserts are arranged at 45 degrees into the 5mm thick X 12 mm wide dressing blade. MCD logs 0.8mm x 0.8mm x 5mm equally-spaced set on centre with 0.25mm (0.010'') - 0.5mm (0.020") lapped radius. Included 40 degree angle on the side of the blade.
Number 1 Morse Taper 20mm long shank.
BTM-5810. O.25mm (0.010'') Radius.
BTM-5820. 0.5mm (0.020'') Radius.

Impregnated 2A Grit Block 1/4" Thick x 1/2" Wide x 1/2" High With 60 Degree Included Angle on The Top Set at 0 Degree Angle into Number One Morse Taper Studer Shank.
BGS-2A660. 20/30 Medium Grit
BGS-2A860. 30/40 Fine Grit

Inserts are arranged at 45 degrees into the 5mm thick X 10 mm wide dressing blade. 3 CVD logs 0.8mm x 0.8mm x 5mm equally-spaced set on centre with 0.2mm (0.008'') - 0.5mm (0.020") lapped radius. Included 40 degree angle on the side of the blade.
Number 1 Morse Taper 20mm long shank.
BTM-3810. O.25mm (0.010'') Radius.
BTM-3820. 0.5mm (0.020'') Radius.