MCD & CVD Synthetic Diamond Dressing Plates

Inserts are arranged at 45 degrees into the 5mm thick X 10 mm wide dressing blade. MCD logs 0.8mm x 0.8mm x 5mm equally-spaced set on centre with 0.2mm (0.008'') - 0.5mm (0.020") lapped radius. Included 40 degree angle on the side of the blade.
The blade is set down at 10 degree angle.
0.437'' diammeter x 0.650'' long with four flats shank.
Relap is available.
BTT-38-10. O.25mm (0.010'') Radius.
BTT-38-20. 0.5mm (0.020'') Radius.

Inserts are arranged at 45 degrees into the 5mm thick X 12 mm wide dressing blade. CVD logs 0.8mm x 0.8mm x 5mm equally-spaced set on centre with 0.2mm (0.008'') - 0.5mm (0.020") lapped radius. Included 40 degree angle on the side of the blade.
Number 1 Morse Taper 20mm long shank.
BTM-5810. O.25mm (0.010'') Radius.
BTM-5820. 0.5mm (0.020'') Radius.

Okuma cone point CVD 1/2 Carat 11mm diameter 40mm OAL shank. Precision dresser is accurately coned to the specified included angle and radius. These tools are used for precision dressing when the most intricate form and radii are required.
BCO-6008 60°angle 0.008" radius
BCO-6010
BCO-6020 60 Degree Angle 0.020" Radius
BCO-6032

Inserts are arranged at 45 degrees into the 5mm thick X 10 mm wide dressing blade. MCD logs 0.8mm x 0.8mm x 5mm equally-spaced set on centre with 0.2mm (0.008'') - 0.5mm (0.020") lapped radius. Included 40 degree angle on the side of the blade.
Number 1 Morse Taper 20mm long shank.
BTM-38-10. O.25mm (0.010'') Radius.
BTM-38-20. 0.5mm (0.020'') Radius.

Inserts are arranged at 45 degrees into the 5mm thick X 10 mm wide dressing blade. MCD logs 0.8mm x 0.8mm x 5mm equally-spaced set on centre with 0.2mm (0.008'') - 0.5mm (0.020") lapped radius. Included 40 degree angle on the side of blade. Number 1 Morse Taper 20mm long shank.
BTO-38-10. O.25mm (0.010'') Radius.
BTO-38-20. 0.5mm (0.020'') Radius.

Inserts are arranged at 45 degrees into the 5mm thick X 10 mm wide x 30mm long dressing blade. MCD-CVD logs 0.8mm x 0.8mm x 5mm equally-spaced set on centre with 0.2mm (0.008'') - 0.5mm (0.020") lapped radius. Included 40 degree angle on the side of the blade. 6.3mm mounting hole.
BTB-38-10. O.25mm (0.010'') Radius.
BTB-38-20. 0.5mm (0.020'') Radius.

Inserts are arranged at 45 degrees into the 5mm thick X 10 mm wide dressing blade. MCD logs 0.6mm x 0.6mm x 5mm equally-spaced set on centre with 0.2mm (0.008'') - 0.5mm (0.020") lapped radius. Blade is set down at 5 degree angle.
Included 40 degree angle on the side of blade.
8mm diameter x 17mm long shank.

Inserts are arranged at 45 degrees into the 5mm thick X 10.5 mm wide x 25 mm long dressing blade. MCD-CVD logs 0.8mm x 0.8mm x 5mm equally-spaced set on centre with flat top.
Included 40 degree angle on the side of the blade.
6.3mm mounting hole.

Inserts are arranged parallel into the 5mm thick X 13mm wide x 28 mm long dressing blade. MCD-CVD logs 0.4mm x 0.8mm x 5mm equally-spaced set on centre with flat top.
Included 40 degree angle on the side of the blade.
6.3mm mounting hole.