DIAMOND TOOLS PRODUCTS

A heavy duty, Single-layer tool designed for straight-faces dressing on large, coarse-grit grinding wheels. Forty-eight diamonds set on the face at a 15 degree angle. 7/16” x 1” shank.

Inserts are arranged at 45 degrees into the 5mm thick X 10 mm wide dressing blade. MCD logs 0.8mm x 0.8mm x 5mm equally-spaced set on centre with 0.2mm (0.008'') - 0.5mm (0.020") lapped radius. Included 40 degree angle on the side of the blade.
The blade is set down at 10 degree angle.
0.437'' diammeter x 0.650'' long with four flats shank.
Relap is available.
BTT-38-10. O.25mm (0.010'') Radius.
BTT-38-20. 0.5mm (0.020'') Radius.

A heavy duty, Single-layer tool designed for straight-faces dressing on large, coarse-grit grinding wheels. Forty-eight diamonds set on the face at a 15 degree angle. 7/16” x 1” shank.

Inserts are arranged at 45 degrees into the 5mm thick X 10 mm wide dressing blade. MCD logs 0.8mm x 0.8mm x 5mm equally-spaced set on centre with 0.2mm (0.008'') - 0.5mm (0.020") lapped radius. Included 40 degree angle on the side of the blade.
The blade is set down at 10 degree angle.
0.437'' diammeter x 0.650'' long with four flats shank.
Relap is available.
BTT-38-10. O.25mm (0.010'') Radius.
BTT-38-20. 0.5mm (0.020'') Radius.

Inserts are arranged at 45 degrees into the 5mm thick X 10 mm wide dressing blade. MCD logs 0.8mm x 0.8mm x 5mm equally-spaced set on centre with 0.2mm (0.008'') - 0.5mm (0.020") lapped radius. Included 40 degree angle on the side of the blade.
Number 1 Morse Taper 20mm long shank.
BTM-38-10. O.25mm (0.010'') Radius.
BTM-38-20. 0.5mm (0.020'') Radius.

Inserts are arranged at 45 degrees into the 5mm thick X 10 mm wide dressing blade. MCD logs 0.8mm x 0.8mm x 5mm equally-spaced set on centre with 0.2mm (0.008'') - 0.5mm (0.020") lapped radius. Included 40 degree angle on the side of blade. Number 1 Morse Taper 20mm long shank.
BTO-38-10. O.25mm (0.010'') Radius.
BTO-38-20. 0.5mm (0.020'') Radius.

Inserts are arranged at 45 degrees into the 5mm thick X 10 mm wide x 30mm long dressing blade. MCD-CVD logs 0.8mm x 0.8mm x 5mm equally-spaced set on centre with 0.2mm (0.008'') - 0.5mm (0.020") lapped radius. Included 40 degree angle on the side of the blade. 6.3mm mounting hole.
BTB-38-10. O.25mm (0.010'') Radius.
BTB-38-20. 0.5mm (0.020'') Radius.

Inserts are arranged at 45 degrees into the 5mm thick X 10 mm wide dressing blade. MCD logs 0.6mm x 0.6mm x 5mm equally-spaced set on centre with 0.2mm (0.008'') - 0.5mm (0.020") lapped radius. Blade is set down at 5 degree angle.
Included 40 degree angle on the side of blade.
8mm diameter x 17mm long shank.

Inserts are arranged at 45 degrees into the 5mm thick X 10.5 mm wide x 25 mm long dressing blade. MCD-CVD logs 0.8mm x 0.8mm x 5mm equally-spaced set on centre with flat top.
Included 40 degree angle on the side of the blade.
6.3mm mounting hole.