1. MCD & CVD Synthetic Diamond Dressing Plates PL

BTT-38 Toyoda MCD-CVD 3 Log Profile and straight Dressing Tool
Cena netto: $124.00
Dodaj szt.   
BTT-38  Toyoda MCD-CVD 3 Log Profile and straight Dressing  Tool
Inserts are arranged at 45 degrees into the 5mm thick X 10 mm wide dressing blade. MCD logs 0.8mm x 0.8mm x 5mm equally-spaced set on centre with 0.2mm (0.008'') - 0.5mm (0.020") lapped radius. Included 40 degree angle on the side of the blade.
The blade is set down at 10 degree angle.
0.437'' diammeter x 0.650'' long with four flats shank.
Relap is available.
BTT-38-10. O.25mm (0.010'') Radius.
BTT-38-20. 0.5mm (0.020'') Radius.
 
BTM-38. Studer MCD-CVD 3 Log Profile & Straight Dressing Tool
Cena netto: $119.00
Dodaj szt.   
BTM-38. Studer MCD-CVD 3 Log Profile & Straight Dressing Tool
Inserts are arranged at 45 degrees into the 5mm thick X 10 mm wide dressing blade. MCD logs 0.8mm x 0.8mm x 5mm equally-spaced set on centre with 0.2mm (0.008'') - 0.5mm (0.020") lapped radius. Included 40 degree angle on the side of the blade.
Number 1 Morse Taper 20mm long shank.
BTM-38-10. O.25mm (0.010'') Radius.
BTM-38-20. 0.5mm (0.020'') Radius.
 
BTO-38. Okuma MCD-CVD Three Log Profile & Straight Dressing Tool
Cena netto: $119.00
Dodaj szt.   
BTO-38.   Okuma MCD-CVD  Three Log  Profile & Straight  Dressing Tool
Inserts are arranged at 45 degrees into the 5mm thick X 10 mm wide dressing blade. MCD logs 0.8mm x 0.8mm x 5mm equally-spaced set on centre with 0.2mm (0.008'') - 0.5mm (0.020") lapped radius. Included 40 degree angle on the side of blade. Number 1 Morse Taper 20mm long shank.
BTO-38-10. O.25mm (0.010'') Radius.
BTO-38-20. 0.5mm (0.020'') Radius.
 
BTB-38 MCD-CVD Three Log Profile & Straight Dressing Blade Tool
Cena netto: $119.00
Dodaj szt.   
BTB-38  MCD-CVD Three Log Profile & Straight Dressing Blade Tool
Inserts are arranged at 45 degrees into the 5mm thick X 10 mm wide x 30mm long dressing blade. MCD-CVD logs 0.8mm x 0.8mm x 5mm equally-spaced set on centre with 0.2mm (0.008'') - 0.5mm (0.020") lapped radius. Included 40 degree angle on the side of the blade. 6.3mm mounting hole.
BTB-38-10. O.25mm (0.010'') Radius.
BTB-38-20. 0.5mm (0.020'') Radius.
 
BSH-36 MCD 3 Log Shigiya Straight and Profile Dressing Tool
Cena netto: $99.00
Dodaj szt.   
BSH-36 MCD 3 Log Shigiya Straight and Profile Dressing  Tool
Inserts are arranged at 45 degrees into the 5mm thick X 10 mm wide dressing blade. MCD logs 0.6mm x 0.6mm x 5mm equally-spaced set on centre with 0.2mm (0.008'') - 0.5mm (0.020") lapped radius. Blade is set down at 5 degree angle.
Included 40 degree angle on the side of blade.
8mm diameter x 17mm long shank.
 
BTB-5MT MCD 3 Log Profile and Straight Dressing Blade Tool
Cena netto: $89.00
Dodaj szt.   
BTB-5MT  MCD 3 Log Profile and Straight  Dressing Blade Tool
Inserts are arranged at 45 degrees into the 5mm thick X 10.5 mm wide x 25 mm long dressing blade. MCD-CVD logs 0.8mm x 0.8mm x 5mm equally-spaced set on centre with flat top.
Included 40 degree angle on the side of the blade.
6.3mm mounting hole.
 
BTN-481 Neddle Synthetic Diamond Dressing Plate
Cena netto: $99.00
Dodaj szt.   
BTN-481 Neddle Synthetic Diamond Dressing Plate
Inserts are arranged parallel into the 5mm thick X 13mm wide x 28 mm long dressing blade. MCD-CVD logs 0.4mm x 0.8mm x 5mm equally-spaced set on centre with flat top.
Included 40 degree angle on the side of the blade.
6.3mm mounting hole.
 
BTM-46S. Synthetic Diamond Dressing Tool
Cena netto: $99.00
Dodaj szt.   
BTM-46S.  Synthetic Diamond Dressing Tool
Four inserts are arranged at 45 degrees into the 5mm thick X 10mm wide x 19mm long dressing blade. MCD-CVD logs 0.6mm x 0.6mm x 5mm equally-spaced set on centre with flat top.
Included 40 degree angle on the side of the blade.
Blade is set at the 15 degree angle in to 7/16''diameter x 1'' long shank with four flats.
 
BTM-48 Synthetic Diamond Dressing Plate
Cena netto: $99.00
Dodaj szt.   
BTM-48 Synthetic Diamond Dressing Plate
Four inserts are arranged at 45 degrees into the 5mm thick X 10mm wide x 19mm long dressing blade. MCD-CVD logs 0.8mm x 0.8mm x 5mm equally-spaced set on centre with flat top.
Included 40 degree angle on the side of the blade.
Blade is set at the 15 degree angle in to 7/16''diameter x 1'' long shank with four flats.
inserts are arranged at 45 degrees into the 5mm thick X 10mm wide x 19mm long dressing blade. MCD-CVD logs 0.8mm x 0.8mm x 5mm equally-spaced set on centre with flat top.
Included 40 degree angle on the side of the blade.
Blade is set at the 0 degree angle in the 7/16'' diammeter x 1'' long shank with four flats.
 
pełny HTML | wersja mobilna